ESD Static Shielding Bags
ESD Static Shielding Bags are the primary method of packaging ICs, circuit boards, Hard Disk and other delicate electronic products against static electricity.
These bags are widely used in most electronic manufacturing companies and are also known as Metal-In shielding bags as the metal shield is buried between two plastic layers.
ESD bags has a buried metal shielding layer that offers superior durability where it is constructed from an alloy electrostatic shield with a tough layer of polyester protection, resulting in good abrasion and puncture resistant, and they are semi-transparent.
Thickness: 3.1 mil.
Our ESD Static Shielding Bag Product Reference is known as: TLS3100.
ESD Attention Warning Labels or also known as ESD caution labels, are RoHS labels which are easy to use and to provide the ESD symbol and warning message needed to complete your ESD protective packages or shipments solutions. ESD labels are tamper evident to help monitor whether a package has been opened. Such labels are normally used on ESD bags, ESD boxes, ESD packages to ensure proper warning of ESD sensitive material inside. We customize these ESD labels to the various sizes which you require to complete your packaging solution.
SPECIFICATIONS
| PHYSICAL PROPERTIES | Test Method | |
| Total thickness | 3.1 mils | |
| Tensile Strength | MD 39 lbs/mm2 TD 27 lbs/mm2 |
ASTM D882 : 1997 |
| Tear Strength | MD 8.4 lbs TD 9.4 lbs |
ASTM D1004 : 1994a |
| Puncture Strength | >45 lbs | FTMS 101-C, Method 2065:1980 |
| Elongation at Break | MD 47 % TD 58 % |
ASTM D882 : 1997 |
| Heat Seal Strength | >9 lbs/mm2 | ASTM D882 : 1997 |
| Water Vapour Transmission ( @ 38C±0.6C/90±2%RH) |
6 (g/day.M2) | ASTM E96 : 1995 |
| Light Transmission( under A Light) | >9% ± 5% | ASTM D1003: 2000 |
| ELECTRICAL PROPERTIES | Test Method | |
| EMI Shielding (between 1 & 10GHZ) | > 10dB | MIL-B-81705-C |
| Surface Resistivity (both surfaces @ 12% R.H.) | < 1011 ohms/sq (1010 ohms/sq average) |
ASTM D-257 |
| Resistivity – Conductive Metal Layer | < 50 ohms/sq ( 5 x 101 ohms/sq ) |
ASTM D-257 |
| Capacitive Probe Test (High Voltage Discharge) |
< 10 volts | EIA – Std 541 / Appendix E |
| Static Decay Test (5,000 volts to O volt) |
< 0.01 sec. | FTMS 101C, Method 4046.1 |
| Charge Generation – norminal (Modified incline plane ½ inch disc. average nC/sq.in.) Teflon : Quartz : |
– 0.09 +0.10 |
The values shown above were developed from random samples taken from production material. We believe them to be typical for this product. Because of normal lot to lot variations, actual values may vary somewhat from these depicted here. TLS International Pte Limited makes no warranty, express or implied, as to the suitability of these materials for any specific product. Users should determine the product suitability through their own testing and evaluation.
